Swirl control valve control solenoid valve

Swirl Control Solenoid Valve. Swirl Control Valve Solenoid !HELP! When the ECM sends an OFF signal, the vacuum signal is cut and the swirl. All good? Ok so first off, you want to find the Swirl Control Valve Solenoid.

I think that may be because the factory manual lists several other things that can cause the problem besides the solenoid valve If the only code you have is the P1130, then the likely cause of the problem is just as the code reader says, the "Swirl control valve solenoid valve" which is the part I have listed.

Emission Control Swirl Valve Solenoid Mitsubishi PAJERO 4m41 Genuine

If the only code you have is the P1130, then the likely cause of the problem is just as the code reader says, the "Swirl control valve solenoid valve" which is the part I have listed. But hey, its easy enough, so first off, pop the radiator cap off and check the coolant level The solenoid valve controls swirl control valve's shut/open condition

Nissan Pickup Swirl Control Valve Q&A Location, Solenoid, DTC. The automobile fault code P1130 indicates a problem with the swirl control valve in the engine Solenoid is energized when ECU provides a ground for solenoid through ECU terminal No

EMISSION CONTROL SWIRL VALVE VACUUM SOLENOID Grelly UK. Now I've heard from one or two people that this could be due to a low coolant level, however, I don't know how true that is But hey, its easy enough, so first off, pop the radiator cap off and check the coolant level